IB-19500CP Cross Section Polisher** This product is discontinued. **
- Features
- Application
- Related Products
- Information
Features

New high-speed and fine milling modes achieves even higher throughput of high-quality cross sections.
Intermittent milling mode is standard, simplifying the handling of specimens susceptible to heat damage.
Improvements to facilitate processing of a wide range of materials include:
Intermittent milling mode is standard, simplifying the handling of specimens susceptible to heat damage.
Improvements to facilitate processing of a wide range of materials include:
The evolution of the Cross Section Polisher (CP)
- High-speed processing achieved with a new ion source
- Reduced specimen damage with fine milling & intermittent mode
- A “Quick Start” function reduces total process time
- Charge prevention IN-situ coating function (option)
IB-19500 Features
★ New high-speed ion source
Delivers 500μm/h (8kV/2 hour average)

Processing results for 8kV, 2 hours (Si)
Delivers 500μm/h (8kV/2 hour average)

Processing results for 8kV, 2 hours (Si)
★Selectable finishing
By setting the fine milling parameters after high-speed processing
ion damage to the cross section can be reduced.

By setting the fine milling parameters after high-speed processing
ion damage to the cross section can be reduced.

★Damage reduction with intermittent mode
Intermittent milling mode is standard, allowing heat damage of specimens to be reduced.
The intermittent setting can be made in 1 second increments.

Intermittent milling mode is standard, allowing heat damage of specimens to be reduced.
The intermittent setting can be made in 1 second increments.

Specifications
Gallery
Related Products
Information
Installation Examples
